Allumer
- 1Press the power button (bottom-left, ⏻ symbol).
Kiturami NRS-1000HD expliqué
A Kiturami room-by-room (각방) controller: one screen shows the living room (거실) and rooms 1–3, with buttons for mode, timer on/off, up/down and power.
Nous n'avons pas trouvé le manuel de ce modèle exact ; ces étapes viennent du modèle le plus proche. S'il réagit autrement, envoyez-nous une photo.
À quoi sert chaque bouton ?
- 1Mode stickers · ROOM / TIMER / OUTMODE / HOT WATER(English stickers)Hand-added English labels for the modes the 기능 button cycles through: room, timer, away, hot water/bath.
- 2Room mode (shown) · 실내silnaeCurrent mode of the selected room. Sun icon + 실내 = heating to a set temperature.
- 3Current temp · 현재온도hyeonjae ondoTemperature in the selected room (22.0°C here).
- 4Rooms · 거실 1 2 3geosil il i sam거실 = living room, 1/2/3 = bedrooms. The underlined one is the room you are viewing/changing.
- 5Room select · 방선택bang seontaekPrinted over 기능 and 예약가동 — likely press both together to step to the next room (unverified).
- 6Mode · 기능 (MODE)gineungCycles the mode for the selected room: 실내 (room) → 예약 (timer) → 외출 (away) → 목욕/온수 (hot water/bath).
- 7Timer: run time · 예약가동 (TIMER-ON)yeyak gadongIn 예약 mode, sets how many minutes the heating RUNS each cycle.
- 8Up · ▲ollimRaises the wanted temp or the value being set.
- 9Power · 전원jeonwonOn/off for the controller.
- 10Timer: rest time · 예약정지 (TIMER-OFF)yeyak jeongjiIn 예약 mode, sets how many hours the heating RESTS between runs.
- 11Down · ▼naerimLowers the wanted temp or the value being set.
Quel réglage choisir ?
Your room: 실내 at 21–22°C. Empty rooms: 외출. Avoid 예약 unless you know the numbers (about 20 min on / 2 h off).
Comment… ?
Chauffer la pièce à une température
- 1Check which room is underlined (거실, 1, 2 or 3). Change room with 방선택 (likely 기능 + 예약가동 together — unverified).
- 2Press 기능 (MODE) until 실내 shows.
- 3Press ▲/▼ to set 22°C. Wait about 10 s and it saves.
Partir quelques jours
- 1Press 기능 until 외출 shows. Rooms are only kept from freezing.
- 2Unused rooms can stay in 외출 while you heat your own room.
Programmer
- 1Press 기능 until 예약 shows.
- 2Press 예약가동 (TIMER-ON) and set the run minutes with ▲/▼ (sister model: 5–60 min, default 20).
- 3Press 예약정지 (TIMER-OFF) and set the rest hours with ▲/▼ (sister model: default 2 h).
- 4Wait ~10 s to save.
Eau chaude seule (été)
- 1Set every room to 외출 with 기능. Hot water keeps working from the boiler (unverified on this model).
Éteindre
- 1Press power. In winter, prefer 외출 so pipes in each room stay safe.
Que signifient les mots à l'écran ?
| 실내 (sun icon) | Room mode | Heats the selected room to its set temp. |
|---|---|---|
| 예약 | Timer | Runs X minutes, rests Y hours. |
| 외출 | Away | Frost protection only (sister model: heats only below ~7°C). |
| 목욕 | Bath / hot water | Hot-water priority; sister model returns after 2 h 30 min. |
| 현재온도 22.0℃ | Current temp | Selected room's temperature. |
| 거실 / 1 / 2 / 3 | Rooms | Underlined = room currently shown. |
Les pièges de ce modèle
- Each room has its own mode and temperature — make sure the room you are standing in is the one underlined before changing anything.
- The 22.0 on screen is the CURRENT temp of the selected room, not necessarily your room.
- This is a zone controller: the boiler itself may also have its own Kiturami controller elsewhere.
Un code erreur s'affiche ?
No model-specific codes found. Power off/on once; if it repeats, call Kiturami 1588-9000.
Service après-vente (coréen) : 1588-9000 (not visible in photo; Kiturami national A/S)