首页 / 锅炉面板 / Slave Thermostat Reon System Slave Thermostat 英文说明 A bedroom (slave) thermostat from a Reon multi-room floor-heating system: it shows room number, current and set temperature, and you turn the dial to change the target.
我们没有找到这个型号的确切说明书,因此这些步骤来自与它最接近的型号。如果你的面板表现不同,请发一张照片给我们。
每个按钮是做什么的? 1 Heating lamp · 난방 nanbang Red lamp: lit when this room is calling for heat. ↑ 照片
2 Room number · 방 6 bang 6 This unit controls room 6 of the system. ↑ 照片
3 Current temperature · 현재온도 hyeonjae ondo Room temperature now (16.5°C). ↑ 照片
4 Set temperature · 설정온도 seoljeong ondo Target (23.5°C). ↑ 照片
5 Mode icon · ☀ Probably normal/day mode. Not verified. ↑ 照片
6 Power · 전원 jeonwon Heating on/off for this room. ↑ 照片
7 Dial · Turn to change the set temperature. ↑ 照片
8 Reservation · 예약 yeyak Timed heating. Not verified for this model. ↑ 照片
9 Away · 외출 oechul Low-temperature hold while you are away. ↑ 照片
10 Mode · 모드 modeu Switches the control mode (e.g. temperature vs timer). Not verified. ↑ 照片
我该用什么设置? 20-22°C in temperature mode; 외출 when out for the day.
怎么……? 开机 1 Press 전원. 把房间加热到设定温度 1 Turn the dial until 설정온도 reads 22.0. 2 The red 난방 lamp lights while the room is below target. 离开几天 1 Press 외출. Press again when back. 关机 1 Press 전원 again. 屏幕上的字是什么意思? 방 Room Room number this thermostat controls. 현재 온도 Current temp Measured room temperature. 설정 온도 Set temp Target temperature.
这款型号有哪些容易踩的坑? Reon is a smaller brand and some older Reon systems are hard to get serviced. If the actuator under the sink keeps cycling, the room may heat poorly. If the living-room master unit is dead, bedroom units may not work either. 显示错误了。怎么办? Installers report a 'C4' error on Reon thermostats; its meaning is not documented online.
客服电话(韩语):Not printed on panel.
阅读完整的韩国供暖指南 →
资料来源