A newer white Daesung controller with a plain screen and six buttons: โ and + change whatever is selected, and four labelled buttons pick heating, hot water, timer and power.
๊ฐ ๋ฒํผ์ ๋ฌด์จ ๊ธฐ๋ฅ์ธ๊ฐ์?
1Screen ยท ํ์์ฐฝpyosichangShows the current mode and temperature. A flame (์ฐ์) icon appears while the burner is firing.
2Away icon ยท ์ธ์ถoechulLit when the boiler is in Away mode, which mainly protects pipes from freezing.
3Running light ยท ๊ฐ๋gadongGlows green while the boiler is actually heating.
4Down ยท โLowers the setting that is showing: room or floor temperature, hot water, or timer values.
5Up ยท +Raises the setting that is showing.
6Heating / Away ยท ๋๋ฐฉยท์ธ์ถnanbangยทoechulPress to switch heating on. Press again to step to Away mode, and again to Hot water only (only the hot-water temperature shows).
7Hot water ยท ์จ์onsuPress, and the hot-water temperature blinks; set it with โ / + (37โ45ยฐC in 1ยฐ steps, 45โ60ยฐC in 5ยฐ steps).
8Timer / Settings ยท ์์ฝยท์ค์ yeyakยทseoljeongPress for timer heating: set 'every 1โ12 hours, run 5โ60 minutes' with โ / +.
9Power ยท ์ ์jeonwonTurns the screen and the boiler on or off. Off stops both heating and hot water, so leave it on in winter.
์ด๋ค ์ค์ ์ด ์ข๋์?
Room mode at 20ยฐC, hot water 40โ45ยฐC, power on all winter. Away for trips of several days, not for a day at work.
์ด๋ป๊ฒ ํ๋์?
์ผ๊ธฐ
1Press ์ ์ (bottom right). The screen lights up.
์ค๋ด ์จ๋ ๋ง์ถ๊ธฐ
1Press ๋๋ฐฉยท์ธ์ถ until the heating screen shows (no ์ธ์ถ icon).
2Press โ or + to set about 20ยฐC (room mode range is 10โ40ยฐC).
3Wait. It saves by itself; the green ๊ฐ๋ light shows it is heating.
์จ๋ ๋ชจ๋
1Room and floor mode are switched with the power OFF: press ์ ์ to turn the screen off.
2Hold ์์ฝยท์ค์ and ์จ์ together for 5 seconds.
3Turn it back on with ์ ์; set the floor-water temperature with โ / + (50โ80ยฐC). Start around 60ยฐC.
๋ฉฐ์น ์ง ๋น์ธ ๋
1Press ๋๋ฐฉยท์ธ์ถ until the ์ธ์ถ icon appears in the top-right of the screen.
2To come back, press ๋๋ฐฉยท์ธ์ถ again.
์์ฝ ์ค์
1Press ์์ฝยท์ค์ . The ์์ฝ icon appears.
2Use โ / + to set how often (every 1โ12 hours) and how long it runs (5โ60 minutes).
3Example: every 3 hours, run 20 minutes.
์จ์๋ง (์ฌ๋ฆ)
1Press ๋๋ฐฉยท์ธ์ถ repeatedly until only the hot-water temperature is on the screen.
2Set the temperature with โ / +.
์จ์ ์จ๋ ๋ฐ๊พธ๊ธฐ
1Press ์จ์. The hot-water temperature blinks.
2Press โ or + (37โ45ยฐC in 1ยฐ steps, 45โ60ยฐC in 5ยฐ steps). 40โ45ยฐC is plenty for showers.
3Stop pressing; when the blinking stops it is saved.
๋๊ธฐ
1To stop heating but keep hot water, set the room temperature below the current temperature, or use ์จ์์ ์ฉ (hot water only).
2Press ์ ์ only if you really want both heating and hot water off. Never in a freezing week.
ํ๋ฉด ๊ธ์๋ ๋ฌด์จ ๋ป์ธ๊ฐ์?
์ฐ์
Burning
The burner is firing right now. Normal.
์์ฝ
Timer
Timer heating is on; the screen shows the cycle (hours) and the run time (minutes).
์ธ์ถ
Away
Away mode is on; the boiler heats only to stop freezing.
๊ฐ๋ (green light)
Running
Heating is running.
์ด ๋ชจ๋ธ์์ ์์ฃผ ํท๊ฐ๋ฆฌ๋ ์
Room/floor mode only switches with the power OFF: hold ์์ฝยท์ค์ + ์จ์ for 5 seconds.
๋๋ฐฉยท์ธ์ถ is one button that cycles heating โ away โ hot water only. If the room is cold, check you did not leave it on ์ธ์ถ.
์ ์ off stops hot water too.
Timer runs for the set minutes every cycle no matter the room temperature, so 'every 1 hour, 60 minutes' is effectively always on.
์๋ฌ๊ฐ ๋ ์
Note the number on the screen, switch off with ์ ์, wait a minute, switch on. If it returns, call Daesung A/S 1588-8577 or your landlord.