Not a heater: this is the remote for the flat's fresh-air ventilation unit (heat-recovery 환기 system). It moves air in and out and has nothing to do with floor heating.
Nous n'avons pas trouvé le manuel de ce modèle exact ; ces étapes viennent du modèle le plus proche. S'il réagit autrement, envoyez-nous une photo.
À quoi sert chaque bouton ?
1Status screen · OFFShows OFF when the fan is stopped; otherwise it shows the fan speed or mode.
2Power · 전원jeonwonStarts or stops the ventilation fan.
3Up · ∧Raises the fan speed or changes the value in a menu.
4Menu · 메뉴menyuOpens the menu: timer, filter settings and similar. Not needed for daily use.
5Auto · 자동jadongAutomatic ventilation: the unit picks the fan speed itself (exact logic varies by install, often by timer or air-quality sensor).
6Down · ∨Lowers the fan speed or value.
7Set / confirm · 설정seoljeongConfirms a menu choice.
Quel réglage choisir ?
자동 (Auto) or the lowest speed most of the time. Run it on high for 20-30 minutes after cooking or showering. In winter, low is enough. It recovers some heat but still brings in cold outdoor air.
Comment… ?
Allumer
1Press 전원.
2Use ∧/∨ for the fan speed, or press 자동 for automatic.
Chauffer la pièce à une température
1This panel cannot heat. Use the thermostat next to it (the Kotech panel on the left in photo 64).
Partir quelques jours
1Leave it on low or 자동, or switch it off with 전원. It does not affect frost protection.
Éteindre
1Press 전원 until the screen shows OFF.
Que signifient les mots à l'écran ?
OFF
Off
Ventilation fan stopped. This does not affect heating at all.
Les pièges de ce modèle
People press buttons here expecting the floor to warm up. Nothing will happen: this panel moves air only.
Running it on high all winter makes rooms feel colder and drier.
A buzzer or warning code usually means the filter is due. Ask the landlord or management office; filters are a consumable.
Service après-vente (coréen) : Not printed on panel. Airpass main line: 062-382-4543 (company website footer).