Encender
- 1Press 전원.
Reon System Slave Thermostat explicado
A bedroom (slave) thermostat from a Reon multi-room floor-heating system: it shows room number, current and set temperature, and you turn the dial to change the target.
No encontramos el manual de este modelo exacto; estos pasos vienen del modelo más parecido. Si tu panel funciona distinto, envíanos una foto.
¿Qué hace cada botón?
- 1Heating lamp · 난방nanbangRed lamp: lit when this room is calling for heat.
- 2Room number · 방 6bang 6This unit controls room 6 of the system.
- 3Current temperature · 현재온도hyeonjae ondoRoom temperature now (16.5°C).
- 4Set temperature · 설정온도seoljeong ondoTarget (23.5°C).
- 5Mode icon · ☀Probably normal/day mode. Not verified.
- 6Power · 전원jeonwonHeating on/off for this room.
- 7Dial · Turn to change the set temperature.
- 8Reservation · 예약yeyakTimed heating. Not verified for this model.
- 9Away · 외출oechulLow-temperature hold while you are away.
- 10Mode · 모드modeuSwitches the control mode (e.g. temperature vs timer). Not verified.
¿Qué ajuste uso?
20-22°C in temperature mode; 외출 when out for the day.
¿Cómo…?
Calentar la habitación a una temperatura
- 1Turn the dial until 설정온도 reads 22.0.
- 2The red 난방 lamp lights while the room is below target.
Salir unos días
- 1Press 외출. Press again when back.
Apagar
- 1Press 전원 again.
¿Qué significan las palabras de la pantalla?
| 방 | Room | Room number this thermostat controls. |
|---|---|---|
| 현재 온도 | Current temp | Measured room temperature. |
| 설정 온도 | Set temp | Target temperature. |
Trampas de este modelo
- Reon is a smaller brand and some older Reon systems are hard to get serviced. If the actuator under the sink keeps cycling, the room may heat poorly.
- If the living-room master unit is dead, bedroom units may not work either.
¿Sale un código de error?
Installers report a 'C4' error on Reon thermostats; its meaning is not documented online.
Servicio técnico (coreano): Not printed on panel.