์ผ๊ธฐ
- 1Press ์ ์ฒด๋๋ฐฉ to switch on every room, or press ๋ฐฉ์ ํ to pick a room and then press ๋๋ฐฉ.
Rinnai RICH-02CR ์์ด ์ค๋ช
The living-room master of an older Rinnai multi-room system: it controls every room's floor valve AND the Rinnai gas boiler (hot water, heating-water temperature) with a big dial.
์ด ๋ชจ๋ธ์ ์ค๋ช ์๋ฅผ ์ฐพ์ง ๋ชปํด ๊ฐ์ฅ ๋น์ทํ ๋ชจ๋ธ ๊ธฐ์ค์ผ๋ก ์ ๋ฆฌํ์ด์. ๋ค๋ฅด๊ฒ ์๋ํ๋ฉด ์ฌ์ง์ ๋ณด๋ด์ฃผ์ธ์.
๊ฐ ๋ฒํผ์ ๋ฌด์จ ๊ธฐ๋ฅ์ธ๊ฐ์?
- 1Hot-water indicator ยท ์จ์onsuShows that boiler hot water is switched on.
- 2Current temp ยท ํ์ฌhyeonjaeRoom temperature now (21ยฐC).
- 3Set temp ยท ์ค์ seoljeongTarget temperature (19ยฐC).
- 4Clock ยท ์คํ 12:00ohuTime of day (์คํ = PM).
- 5Thermometer icon ยท Temperature-control mode indicator.
- 6Room list ยท ๊ฑฐ์ค ยท ๋ฐฉ1-5geosil ยท bangLiving room and rooms 1-5. A drop or flame mark beside a room = that room is heating.
- 7Heating ยท ๋๋ฐฉnanbangTurns heating on/off for the selected room.
- 8All-room heating ยท ์ ์ฒด๋๋ฐฉjeonche nanbangSwitches heating on or off for every room at once.
- 9Hot water ยท ์จ์onsuTurns the boiler's hot-water supply on or off.
- 10Dial + Set ยท ์ค์ seoljeongTurn to change the value (temperature, time). Press the centre ์ค์ to confirm.
- 11Function / hold 3 s = reservation ยท ๊ธฐ๋ฅ์ ํ (์์ฝ 3์ด ๋๋ฆ)gineung seontaekShort press cycles functions such as hot-water temp, heating-water temp and heating method. Hold 3 s for reservation (delayed heat).
- 12Away ยท ์ธ์ถoechulAway mode: low-level frost protection while out.
- 13Room select ยท ๋ฐฉ์ ํbangseontaekSteps through ๊ฑฐ์ค/๋ฐฉ1-5 so you can set each room here.
์ด๋ค ์ค์ ์ด ์ข๋์?
All rooms on, 21-22ยฐC in used rooms and 18ยฐC elsewhere. Hot water about 45ยฐC. Use ์ธ์ถ for trips, never the boiler power plug.
์ด๋ป๊ฒ ํ๋์?
์ค๋ด ์จ๋ ๋ง์ถ๊ธฐ
- 1Press ๋ฐฉ์ ํ until the room you want is highlighted (๊ฑฐ์ค = living room).
- 2Turn the dial until ์ค์ reads 22.
- 3Press the centre ์ค์ button to confirm.
๋ฉฐ์น ์ง ๋น์ธ ๋
- 1Press ์ธ์ถ. On the newer Rinnai system in this family, Away gives 5 minutes of heat about every 2 hours (unverified on RICH-02CR).
- 2Press ์ธ์ถ again when you are back.
์์ฝ ์ค์
- 1Hold ๊ธฐ๋ฅ์ ํ for 3 seconds (์์ฝ).
- 2Turn the dial to set hours.
- 3Press ์ค์ . Heating stays off for that time and then starts (unverified on this exact model).
์จ์๋ง (์ฌ๋ฆ)
- 1Press ์ ์ฒด๋๋ฐฉ to switch room heating off.
- 2Make sure ์จ์ shows on the screen; if not, press ์จ์. Hot water keeps working with heating off.
์จ์ ์จ๋ ๋ฐ๊พธ๊ธฐ
- 1Press ๊ธฐ๋ฅ์ ํ repeatedly until hot-water temperature (์จ์ ์จ๋) flashes.
- 2Turn the dial to set it (about 45ยฐC is comfortable and safe).
- 3Press ์ค์ to confirm.
๋๊ธฐ
- 1Press ์ ์ฒด๋๋ฐฉ to turn all rooms off, or ๋๋ฐฉ for just the selected room.
ํ๋ฉด ๊ธ์๋ ๋ฌด์จ ๋ป์ธ๊ฐ์?
| ํ์ฌ / ์ค์ | Current / Set | Room temperature now / target. |
|---|---|---|
| ์จ์ | Hot water | Boiler hot water enabled. |
| ๊ฑฐ์ค, ๋ฐฉ1-๋ฐฉ5 | Living room, rooms 1-5 | Zones; a mark beside one means that room's valve is open and it is heating. |
| ์ค์ /์คํ | AM/PM | Clock. |
์ด ๋ชจ๋ธ์์ ์์ฃผ ํท๊ฐ๋ฆฌ๋ ์
- This panel controls the boiler too: turning ์จ์ off means no hot shower even though the boiler is fine.
- Settings apply to the room highlighted by ๋ฐฉ์ ํ. Check the room before turning the dial.
- RICH-02 is discontinued (replaced by RICH-04 / RICH-W). Repairs usually mean replacing the whole set.
์๋ฌ๊ฐ ๋ ์
Boiler error codes appear on this panel or on the boiler itself. Report the code to Rinnai A/S.
A/S: Not printed on panel. Rinnai Korea customer centre 1544-3651.