How do I set the room temperature on the Reon System Slave Thermostat?

1. Turn the dial until 설정온도 reads 22.0. 2. The red 난방 lamp lights while the room is below target.

What should I set the Reon System Slave Thermostat to when I leave for a few days?

1. Press 외출. Press again when back.

Reon System Slave Thermostat 영어 설명

A bedroom (slave) thermostat from a Reon multi-room floor-heating system: it shows room number, current and set temperature, and you turn the dial to change the target.

이 모델의 설명서를 찾지 못해 가장 비슷한 모델 기준으로 정리했어요. 다르게 작동하면 사진을 보내주세요.

서울 집의 Reon System Slave Thermostat 보일러 조절기

1Heating lamp · 난방nanbangRed lamp: lit when this room is calling for heat.
2Room number · 방 6bang 6This unit controls room 6 of the system.
3Current temperature · 현재온도hyeonjae ondoRoom temperature now (16.5°C).
4Set temperature · 설정온도seoljeong ondoTarget (23.5°C).
5Mode icon · ☀Probably normal/day mode. Not verified.
6Power · 전원jeonwonHeating on/off for this room.
7Dial · Turn to change the set temperature.
8Reservation · 예약yeyakTimed heating. Not verified for this model.
9Away · 외출oechulLow-temperature hold while you are away.
10Mode · 모드modeuSwitches the control mode (e.g. temperature vs timer). Not verified.

어떤 설정이 좋나요?

20-22°C in temperature mode; 외출 when out for the day.

어떻게 하나요?

켜기

1Press 전원.

실내 온도 맞추기

1Turn the dial until 설정온도 reads 22.0.
2The red 난방 lamp lights while the room is below target.

며칠 집 비울 때

1Press 외출. Press again when back.

끄기

1Press 전원 again.

화면 글자는 무슨 뜻인가요?

방	Room	Room number this thermostat controls.
현재 온도	Current temp	Measured room temperature.
설정 온도	Set temp	Target temperature.

이 모델에서 자주 헷갈리는 점

Reon is a smaller brand and some older Reon systems are hard to get serviced. If the actuator under the sink keeps cycling, the room may heat poorly.
If the living-room master unit is dead, bedroom units may not work either.

에러가 떠요

Installers report a 'C4' error on Reon thermostats; its meaning is not documented online.

A/S: Not printed on panel.

한국 난방 가이드 전체 보기 →

출처

각 버튼은 무슨 기능인가요?